VC-230 VDSL2 Router

Submitted by admin on Tue, 2010-11-30 23:16
Overview

The PLANET VDSL2 Router, VC-230, is developed with two core networking technologies: Ethernet and VDSL2 (Very High Speed Digital Subscriber Line 2). Based on VDSL 2 technology, the VC-230 provides very high performance access to Internet, up to 100Mbps for both downstream and upstream data transmission. VDSL2 offers the absolute fastest data transmission speeds over existing copper telephone lines without the need for rewiring.

The VC-230 complies with ITU-T G993.2 standard and provides two modes for applications – Bridge and Router. With built-in 4-Port 10/100 Ethernet switch, it provides data delivering and receiving in local network, which gives the best solution for small enterprises and residential LAN networking.

There are two selectable operating modes of VC-230: CO and CPE, which can be adjusted by Web UI. Users can setup Point-to-Point application by connecting two VC-230, one in CO mode and another one in CPE mode, to transmit data in high speed between two networks over existing copper telephone lines.

Via the user-friendly management interface, the VC-230 can be managed easily through standard web browsers. Furthermore, the VC-230 not only provides basic router’s functions such as DHCP server, Virtual Server, DMZ, QoS, and UPnP, but also provides the fully firewall functions such as Network Address Translation (NAT), IP/Port/MAC Filtering and Content Filtering. The VC-230 serves as an Internet firewall to protect your network from being accessed by unauthorized users.

Application
Application
 
Peer-to-Peer Network Connection
A pair of the VC-230, each represents the CO and the CPE device respectively, is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. Telephone service can still be used while the modems are in operation.

Very High-Speed Internet Connection with Wired
The VC-230 is the perfect solution to offer a small group of PCs for Very high-speed broadband Internet connection. It allows multiple users to access to Internet simultaneously. Compliant with VDSL 2 standard, the VC-230 supports downstream rates up to 100 Mbps and upstream rates up to 100 Mbps. The VC-230 also incorporates a 4-Port 10/100Base-TX switching hub to easily create or extend your LAN, and prevent the attacks from the internet.

 

 
VC-230
 
 
 
 
 
 
 
Ordering Information
VC-230 VDSL2 Router (4 x RJ45, 1 x VDSL2 / RJ11, 1 x Phone)
Key Features

Key Features
Internet Access Features
• Shared Internet Access
　All users on the LAN can access the Internet through the VC-230 using only one
　single external IP Address. The local (invalid) IP Addresses are hidden from
　external sources. This process is called NAT (Network Address Translation).

• Built-in VDSL2 Modem
　The VC-230 provides VDSL2 modem and supports all common VDSL2 connections.

• Multiple WAN Connection
　On the Internet (WAN port) connection, the VC-230 supports Dynamic IP Address (IP
　Address is allocated on connection), Fixed IP Address, PPPoE, PPTP and L2TP.

• CO and CPE Support
　The VC-230 provides the Peer-to-Peer connection. Users can select the CO and CPE
　mode manually.

• Bridge and Router Application
　The VC-230 supports two application modes: bridging and routing modes. Currently,
　the default mode is routing mode. Note: routing mode and bridging mode cannot be
　used simultaneously.

Advanced Internet Functions
• Virtual Servers
　This feature allows Internet users to access Internet servers on your LAN. The
　setup is quick and easy.

• Firewall
　The VC-230 supports simple firewall with NAT technology.

• Universal Plug and Play (UPnP)
　UPnP allows automatic discovery and configuration of the Broadband Router. UPnP is
　supported by Windows ME, XP, or later.

• Selectable VDSL2 Profiles
　The VC-230 supports common VDSL2 profiles (30a, 17a, 12a, 12b, 8a, 8b, 8c, 8d) for
　users choice. Users can select different VDSL2 profiles based on their needs.

• User Friendly Interface
　The VC-230 can be managed and controlled through Web UI.

• DMZ Support
　The VC-230 can translate public IP addresses to private IP address to allow
　unrestricted 2-way communication with the servers or individual users on the
　Internet. It provides the most flexibility to run programs smoothly for programs
　might be restricted in NAT environment.

• RIP1/2 Routing
　It supports RIPv1/2 routing protocol for routing capability.

• VPN Pass-through Support
　PCs with VPN (Virtual Private Networking) software are transparently supported -
　no configuration is required.

LAN Features
• 4-Port Switch
　The VC-230 incorporates a 4-Port 10/100Base-TX switching hub, making it easy to
　create or extend your LAN.

• DHCP Server Support
　Dynamic Host Configuration Protocol provides a dynamic IP address to PCs and other
　devices upon request. The VC-230 can act as a DHCP Server for devices on your
　local LAN.

Specification
Model VC-230 
Hardware
Standard VDSL2-DMT

–Compliant with VDSL2 ITU-T G.993.2 (8a, 8b, 8c, 8d, 12a, 12b,
　17a, 30a)
–G.997 / G.998 Band Plan support
–Supports up to 100Mbps / 100Mbps for Upstream / Downstream
Complaint with IEEE802.3 / 802.3u
U0 Band Support (25KHz to 276KHz)
Packet Transfer Mode Ethernet in the First Mile(PTM-EFM)

Ports 10/100Base-TX

4 x 10/100Base-TX, Auto-Negotiation, Auto MDI/MDI-X

PHONE
1 x RJ-11, and built-in splitter for POTS connection

VDSL2
1 x RJ-11
LED Indicators PWR, DSL, LAN1-4
Button 1 x RESET button
Software
Max. Sessions 4096
VDSL2 Functionality CO / CPE mode selection
Selectable fast and interleaved mode
Selectable VDSL2 Profiles
Bandwidth Limitation support
Protocol / Feature Router and Bridge mode

Static Routing and RIPv1/2
DMZ and Virtual Server
802.1D
QoS
SNTP
DHCP Server / Client
IGMP Proxy and DNS Proxy
UPnP and DDNS
SNMP v1/v2c *

TR-069 *
VPN VPN Pass-through
Security Built-in NAT Firewall
MAC / IP/ Port Filtering
Content Filtering
SPI Firewall support
Password protection for system management
Management Web-Based configuration
Environment Specification
Dimension (W x D x H) 186 x 143 x 35 mm
Power 12V DC, 1A
Temperature / Humidity Operating: 0~50 Degree C, 5%~ 90% (non-condensing),
Storage: -20~70 Degree C, 0~95% (non-condensing)
Emission FCC, CE
*Feature Enhance by Future FW upgradeable.