Stallion EasyServer II Support

EasyServer II

A range of Articles and Notes that have been collected on common knowledge for the Stallion Easy Server II Access/Terminal Server 

HOW TO backup and restore EasyServer II Configuration.
This set of notes discusses how you can save and restore the configuration of the Easyserver II. It is important that any Easyserver II that you have in the field has a full backup of its configuration. If the unit was to fail you could replace it with another unit and upload the exact configuration before installation in the field. 

HOW TO build a Dial-on-Demand WAN PPP link
The purpose of this application note is to provide a solution to the common networking scenario where a remote site needs to be connected to a main site via inexpensive, low-speed dial-up connections, especially 
where cost minimisation is a factor. 
As the access to all of the systems at the main site and to the Internet via the main site is intermittent, it was deemed that a dial-on-demand PPP connection from the remote site would be most appropriate, as opposed to a permanent PPP connection. Dial-on-demand PPP connections are also useful when using dial-up services that are charged on a time basis (e.g. long distance calls).The assumption in this How-To is that you already have network access to the Easy Server II . 

Command reference manual for Easy Server II
This is a reference manual describing all the commands in the Easy Server II 

HOW TO intregate the use of a Radius Server for Authentication
The purpose of this application note is to outline the configuration options that are available when using a RADIUS server for user authentication with an EasyServer II.