POE

POE-400

Submitted by admin on Mon, 2011-04-11 00:01

Overview

 

The PLANET POE-400 is a 4-Port IEEE 802.3af Power over Ethernet injector hub complied with IEEE 802.3, IEEE 802.3u and IEEE 802.3af standards. Equipped with 4 10/100Base-TX Fast Ethernet ports, the POE-400 supports full 48VDC power for any remote IEEE 802.3af powered device (PD) like Wireless LAN Access Point, IP phone, and LAN Camera. Supporting power supply of 70 watts, the POE-400 provides sufficient power to the 4 remote devices.

There are 8 RJ-45 STP ports on POE-400. Half of the ports on right panel function as "Data" and the other half on left panel function as "Data and Power". Each of the "Data and Power" port is an injector which inserts DC Voltage into the CAT 5 cable for allowing having the cable between the Injector and Splitter to transfer data and power simultaneously.

Application

 

Application
The IEEE 802.3af Injector Hub and equipment installation:
For the places hard to find the power inlet, the POE-400 provides the easiest way to power your Ethernet devices, such as PLANET IEEE 802.3af Power over Ethernet Splitter (POE-152S) with Internet Camera (ICA-210) or Wireless Access Point (WAP-4060PE) installed in the small office. To control the power system of your networking devices, the POE-400 can directly co-work with PLANET ICA-100PE and POE IP Phone VIP-153PT to build VoIP telephony network in the office. Besides, the POE-400 can be directly deployed to connect the third party IEEE 802.3af devices like Cisco AP and POE switches installed 100 meters away.
 
POE-400

Key Features

 

Key Features
• Complies with IEEE 802.3, IEEE 802.3u, 10/100Base-TX
• Complies with IEEE 802.3af, 48VDC power over unused twisted-pair wires
• 4-Port IEEE 802.3af in-line mid-span power injector box
• Full power support for per POE port
• Protection of circuit prevents power interference from ports
• Indication of LED indicator power input
• Palm size for Desktop
• 100~240VAC, 50/60Hz, universal power supply
• FCC, CE class B compliant

Specification

Model POE-400 
Ethernet Connector 8-Port RJ-45 STP with 4-Port "Data" and 4-Port "Data and Power"
Ethernet Data rate 10/100Mbps (vary on Ethernet device attached)
Input voltage DC 48V, 1.5A
Number of device can be powered 4
Ethernet cable TIA/EIA-568, Category 5/5e/6 cable
LED indicator 1 x power, 4 x POE ready / in-use
Operating environment 0~50 Degree C, 5~90% RH
Storage environment -20~70 Degree C, 5~90% RH
Dimension (W x D x H) 70 x 97 x 26 mm
Weight 220g
Emission FCC Class B, CE mark
Standard Compliance IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3af Power over Ethernet

POE-1200G

Submitted by admin on Sun, 2011-04-10 23:43

Overview

Quick and Easy Gigabit PoE Network Deployment
The PLANET POE-1200G is 12-Port Gigabit IEEE 802.3af PoE Web Management injector Hub and complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3af standards. With 12 10/100/1000Base-T Gigabit Ethernet ports, the POE-1200G supports full 48V DC power for any remote IEEE 802.3af powered device (PD) such as Wireless LAN Access Point, IP phone, and IP Camera. Supporting full PoE power budget of 190 Watts, the POE-1200G provides sufficient 15.4 Watts PoE power to 12 remote PD devices.

Easy Cabling Installation
The POE-1200G is installed between a regular Ethernet Switch and the powered devices; it injects power to the PDs without affecting the data transmission performance. It offers a cost effective and quick solution to upgrade network system to IEEE 802.3af Power over Ethernet system without replacing the existing Ethernet Switch. There are 24 RJ-45 STP ports on the front panel of PoE Injector Hub, of which 12 ports on the lower stack function as "Data input" and the other 12 ports on the upper stack function as "PoE (Data and Power) output". The 12 "PoE output" ports are also the power injectors which transmit DC Voltage to the CAT 3/4/5/5e/6 cable and transfer data and power simultaneously between the Injectors and Splitters.

Friendly / Simple Web Management Interface
To efficiently manage the powered devices, the POE-1200G provides Web management interface in which administrators can control the functions including port Enable / Disable, port priority, system configuration, and Username / Password changing and smart features for powered devices. The PoE injector Hub can automatically detect the power status of each port and show massages on its Web management interface. These features also provide users a cost-effective way to manage the device via Internet whenever they are at work or at home.

Application

 

Gigabit PoE Network Deployment
The POE-1200G provides the easiest way to power your Ethernet devices such as IP Camera on the ceiling and the Wireless Access Point installed on the top of the building. With 12 10/100/1000Base-T Gigabit Ethernet ports, the POE-1200G supports full 48V DC power for any remote IEEE 802.3af powered device (PD).

To control the power system of your networking devices, the POE-1200G can directly co-work with PoE IP phones to build VoIP telephony network in the office. Furthermore, the POE-1200G can be directly connected to any third party IEEE 802.3af compliant devices installed 100 meters away.
 
POE-1200G
 
 

 

 

Key Features

 

Interface
• 24-Port 10/100/1000Base-T Gigabit RJ-45 STP
- 12-Port “Data input”
- 12-Port “PoE (Data + Power) output”
• 1 10/100Base-TX management port with auto MDI / MDI-X feature

PoE
• Complies with IEEE 802.3af Power over Ethernet Mid-Span PSE
• Up to 12 IEEE 802.3af devices powered
• Supports PoE power up to 15.4 Watts for each PoE ports
• Automatically detect powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m

PoE Management
• Total PoE power budget control
• Per port PoE function Enable/Disable
• PoE port power feeding priority
• Per PoE port power limit
• PD classification detection
• PoE Power Schedule
• Over Temperature Protection

Management
• Web interface for remote management
• Supports Network Time Protocol
• Firmware upgrade through Web interface
• PLANET Smart Discovery utility automatically finds PLANET devices on the network
• SNMP Trap for alarm notification of events

Hardware
• 19-inch rack mountable; 1U height
• Reset button for default setting and system reboot
• LED indicators for PoE ready, PoE activity, FAN Alert and Power Alert

Standard Compliance
• IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-TX
• IEEE 802.3ab 1000Base-T
• IEEE 802.3af Power over Ethernet
• FCC Part 15 Class A, CE

Specification

Model POE-1200G 
Hardware Specification
Interface "Data" Input Ports: 12x RJ-45 STP
"PoE (Data+Power)" Output Ports: 12x RJ-45 STP
Management Port: 1 x RJ-45; 10/100Base-TX, auto-negotiation, auto-MDI / MDIX
Data Rate 10/100/1000Mbps
LED System: Power x 1 (Green)

　　　　FAN Alert x 1(Green)
Management Port x 2: 10/100 (Orange / Green)
Per PoE Port: PoE in Use x 1 (Green)
Network Cable 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft)
100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft)
1000Base-T: 2-pair UTP Cat. 5e, 6 up to 100m (328ft)
EIA/TIA- 568 100-ohm STP (100m)
Dimension (W x D x H) 440 x 200 x 44 mm (1U height)
Weight 2.73kg
Power Requirement 100-240V AC, 50/60 Hz
Power Consumption 200 Watts max.
Cooling Fan x 1
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet / Mid-Span PSE
PoE Power supply Type Mid-Span
PoE Power Output Per Port DC 48V 15.4 Watts
Power Pin Assignment 4/5(+), 7/8(-)
PoE Power Budget 190 Watts
Management
Management Interface Web, PLANET Smart Discovery Utility
PoE Management Power Limit by Priority and Total Limit
Per port power Enable / Disable
Power feeding priority
Current usage and status
Total power consumption
Per port power Schedule
Management Feature System / Management functions setup

Web firmware upgrade
SNMP Trap for alarm notification of events

Standards Conformance
Standards Compliance IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
Regulation Compliance FCC Part 15 Class A, CE
Environmental Specification
Operating Temperature: 0 ~ 50 Degree C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -40 ~ 70 Degree C
Relative Humidity: 5 ~ 95% (non-condensing)

Power over Ethernet

Vendor: 
Planet

Power over Ethernet - Switches, Hubs, Injectors and Splitters

POE-2400G

Submitted by admin on Wed, 2010-05-19 20:44

Overview

Quick and Eeasy PoE Network Deployment
The PLANET POE-2400 is a 24-Port IEEE 802.3af Power over Ethernet injector hub and complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3af standards. With 24 10/100Base-TX Fast Ethernet ports, this device supports full 48VDC power for any remote IEEE 802.3af powered device (PD) like Wireless LAN Access Point, IP phone, and IP Camera. Supporting power supply of 220 watts, POE-2400 provides sufficient power to 24 remote PD devices.

The POE-2400 is installed between a regular Ethernet Switch and the powered devices, injecting power without affecting the data transmission. It offers a cost effective and quick solution to upgrade network system to IEEE 802.3af Power over Ethernet system without replacing the existing Ethernet switch.

Easy Cabling installation
There are 48 RJ-45 STP ports on the front panel of Hub, in which the 24 ports on the lower stack function as "Data input" and the other 24 ports on the upper stack function as "Data and Power output". Each of the "Data and Power output"port on the upper stack operates as an power injector which transmits DC Voltage to the CAT 5 cable to transfer data and power simultaneously between the Injector and Splitter.

Friendly / Simple Web Management Interface
To efficiently manage the powered devices, POE-2400 provides Web management interface in which administrators can use the functions including port Enable / Disable, port priority, system configuration, and Username / Password changing and with smart features for powered device. The PoE injector hub can auto detect the power status of each port and show massages on its Web management interface. These features also provide a cost-effective way to manage the devices via from Internet whenever you are at work or at home.

Application

PoE Injector Hub
For the places hard to find the power outlet, POE-2400 provides the easiest way to power your Ethernet devices such as PLANET IP Camera ICA-750 on the ceiling and the Wireless Access Point WAP-4060PE installed on the top of the building.

To control the power system of your networking devices, POE-2400 can directly co-work with PLANET VIP-254PT and PoE IP phone to build VoIP telephony network in the office. Furthermore, the POE-2400 can be directly connected to any third party 802.3af devices and PoE Switches installed 100 meters away.

Key Features

 

Interface
• 48-Port 10/100/1000Base-T Gigabit RJ-45 STP
- 24-Port “Data input”
- 24-Port “PoE (Data + Power) output”
• 1 10/100Base-TX management port with auto MDI / MDI-X feature

PoE
• Complies with IEEE 802.3af Power over Ethernet Mid-Span PSE
• Up to 24 IEEE 802.3af devices powered
• Supports PoE power up to 15.4 Watts for each PoE ports
• Automatically detect powered device (PD)
• Circuit protection prevent power interference between ports
• Remote power feeding up to 100m

PoE Management
• Total PoE power budget control
• Per port PoE function Enable/Disable
• PoE port power feeding priority
• Per PoE port power limit
• PD classification detection
• PoE Power Schedule
• Over Temperature Protection

Management
• Web interface for remote management
• Supports Network Time Protocol
• Firmware upgrade through Web interface
• PLANET Smart Discovery utility automatically finds PLANET devices on the network
• SNMP Trap for alarm notification of events

Hardware
• 19-inch rack mountable; 1U height
• Reset button for default setting and system reboot
• LED indicators for PoE ready, PoE activity, FAN Alert and Power Alert

Standard Compliance
• IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-TX
• IEEE 802.3ab 1000Base-T
• IEEE 802.3af Power over Ethernet
• FCC Part 15 Class A, CE

Specification

Model POE-2400G 
Hardware Specification
Interface "Data" Input Ports: 24x RJ-45 STP
"PoE (Data+Power)" Output Ports: 24x RJ-45 STP
Management Port: 1 x RJ-45; 10/100Base-TX, auto-negotiation, auto-MDI / MDIX
Data Rate 10/100/1000Mbps
LED System: Power x 1 (Green)

　　　　FAN Alert x 1(Green)
Management Port x 2: 10/100 (Orange / Green)
Per PoE Port: PoE in Use x 1 (Green)
Network Cable 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft)
100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328ft)
1000Base-T: 2-pair UTP Cat. 5e, 6 up to 100m (328ft)
EIA/TIA- 568 100-ohm STP (100m)
Dimension (W x D x H) 440 x 200 x 44 mm (1U height)
Weight 3.3kg
Power Requirement 100-240V AC, 50/60 Hz
Power Consumption 400 Watts max.
Cooling Fan x 2
Power over Ethernet
PoE Standard IEEE 802.3af Power over Ethernet / Mid-Span PSE
PoE Power supply Type Mid-Span
PoE Power Output Per Port DC 48V 15.4 Watts
Power Pin Assignment 4/5(+), 7/8(-)
PoE Power Budget 380 Watts
Management
Management Interface Web, PLANET Smart Discovery Utility
PoE Management Power Limit by Priority and Total Limit
Per port power Enable / Disable
Power feeding priority
Current usage and status
Total power consumption
Per port power Schedule
Management Feature System / Management functions setup

Web firmware upgrade
SNMP Trap for alarm notification of events

Standards Conformance
Standards Compliance IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3af Power over Ethernet
Regulation Compliance FCC Part 15 Class A, CE
Environmental Specification
Operating Temperature: 0 ~ 50 Degree C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -40 ~ 70 Degree C
Relative Humidity: 5 ~ 95% (non-condensing)
Syndicate content